Up to 25-amp continuous current with proper air flow
Finned heat sinks for both the motor drive MOSFETs and dual BEC regulators to support up to 4 sub-micro servos
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
Programmable throttle input range (1.1–1.9 ms or Auto Select)
Auto motor shut down if signal is lost or there is interference
Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads
Soft start
Overview
This controller has been designed for use in radio control aircraft and to support continuous currents of up to 25 amps when using 2- to 3-cell Li-Po battery packs and up to 4 sub-micro servos. The ESC features a lightweight plastic case with exposed, finned heat sinks for both the motor drive MOSFETs and, unlike many controllers, the BEC regulators give you a more reliable and powerful power supply for your servos.